DIY Guide: McLaren CarPlay & Android Auto Module for McLaren 765LT Spider

By Daren Foertsch

If you own a McLaren 765LT Spider (or a 720S or similar), you've probably realized these supercars aren’t the most user-friendly when it comes to in-car tech. One major drawback? No native Apple CarPlay or Android Auto. Fortunately, there's a plug-and-play solution from KKS Supercar that lets you add this functionality seamlessly without any cutting, splicing, or complicated wiring!

Tools You'll Need:

• Plastic trim removal tool
• 7mm and 8mm sockets and ¼” ratchet
• Velcro tape (usually included with the kit)

⚠️ Pro Tip: If you're working on a convertible model, put the top down for more light and space.

Step 1: Prep Your Workspace

• Put the convertible top down for easier access to panels behind the seats.
• Gather your tools and kit contents.

Step 2: Remove Interior Panels

• Remove the fuse box cover
  • Use your plastic trim tool to gently pry it off.
    
• Remove the center panel with the cargo net
  • This simply pulls away by hand.
    

• Remove the top center panel behind the driver's seat
  • Carefully pull it at an angle to disengage the clips. (Clips are circled)

• Remove the seat belt covers (both sides)
  • These are held with plastic clips. Once the center panel is off, they come out easily.

• Disconnect the tweeters
  • After removing the seat belt panels, unplug the tweeters and set them aside.
• Remove the large lower center panel
  
  • Unscrew six 7mm and 8mm bolts across the top.
    
  • Use your pry tool to pop out the four button clips (carefully to avoid creasing the panel).
    
  • The bottom is held by Velcro—gently pull and lift the panel out of the vehicle.
    

Step 3: Access the Head Unit

• Remove the fiberboard panel covering the head unit
  
  • Take out six 7mm bolts on the bottom.
  • Unplug the connector on the bottom of the back.

Note: Convertible models may have slightly different layout here.

Step 4: Install the CarPlay Module

• Connect antennas and harness to module
  • Screw in the provided antennas to the module.
  • Connect the large white plug on the left and the blue plug on the right as shown

• Plug in harnesses
  • Passenger Side:
    • Unplug the large white and green factory plugs.
    • Plug them into the corresponding ports on the module harness.
    • Plug the module harness into the factory head unit.

• • Driver Side:
    • Unplug the green connector.
    • Connect it to the module harness and plug the module harness into the factory head unit.

• Power check
  
  • If everything is plugged in correctly, the indicator lights on the module will turn on.
    
• Mount the module
  
  • Use the Velcro on the bottom of the module to secure it in place behind the head unit.
    
• Route the USB/update cable
  
  • Tuck and route it to the fuse box area for easy access in the future.
    
    

Step 5: Reassemble Interior

• Put all panels back in reverse order
  
• Pre-align holes properly to avoid forcing or damaging clips.
  
• Reinstall all bolts in a criss cross pattern and press the Velcro-backed pieces firmly into place.
  
• Reconnect tweeters and seat belt covers.
  
• Don’t forget to replace the fuse box cover!
  
  

Step 6: Pair & Set Up CarPlay

• Turn on your vehicle
  
• Press the “Music” button on the infotainment screen.
  

• Go to Bluetooth settings and pair your phone like normal.
  
• Apple CarPlay should launch automatically
  
• You can now easily switch between CarPlay and your native McLaren interface.
  

🔊 Important: To get audio from the system, ensure your phone is both paired via Bluetooth and connected to the module.

This kit is a game-changer for McLaren owners! It adds the convenience of navigation, music, hands-free calls, and more—just like you'd expect from a modern luxury vehicle!

The install process is completely reversible and doesn’t require modifying your factory wiring. Need a kit? We’ve got plug-and-play kits for McLaren, Ferrari, Lamborghini, and other supercars!